dmesg - MSI NVIDIA GeForce GTX 660
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-13) ) #1 SMP Debian 3.16.7-2 (2014-11-06)
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cfd9ffff] usable
BIOS-e820: [mem 0x00000000cfda0000-0x00000000cfdd0fff] ACPI NVS
BIOS-e820: [mem 0x00000000cfdd1000-0x00000000cfdfffff] ACPI data
BIOS-e820: [mem 0x00000000cfe00000-0x00000000cfefffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000022effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Gigabyte Technology Co., Ltd. GA-970A-UD3/GA-970A-UD3, BIOS F7 10/22/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x22f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 base 0000CFE00000 mask FFFFFFE00000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000022f000000 aka 8944M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xcfe00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcfda0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f4c60-0x000f4c6f] mapped at [ffff8800000f4c60]
Base memory trampoline at [ffff880000099000] 99000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01af2000, 0x01af2fff] PGTABLE
BRK [0x01af3000, 0x01af3fff] PGTABLE
BRK [0x01af4000, 0x01af4fff] PGTABLE
init_memory_mapping: [mem 0x22ee00000-0x22effffff]
[mem 0x22ee00000-0x22effffff] page 2M
BRK [0x01af5000, 0x01af5fff] PGTABLE
init_memory_mapping: [mem 0x22c000000-0x22edfffff]
[mem 0x22c000000-0x22edfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x22bffffff]
[mem 0x200000000-0x22bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xcfd9ffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xcfbfffff] page 2M
[mem 0xcfc00000-0xcfd9ffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 1G
RAMDISK: [mem 0x3644c000-0x3721dfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F6B80 000014 (v00 GBT )
ACPI: RSDT 0x00000000CFDD1000 00004C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 0x00000000CFDD1080 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 0x00000000CFDD1100 00792A (v01 GBT GBTUACPI 00001000 MSFT 03000000)
ACPI: FACS 0x00000000CFDA0000 000040
ACPI: MSDM 0x00000000CFDD8B00 000055 (v03 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: HPET 0x00000000CFDD8B80 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 0x00000000CFDD8BC0 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: EUDS 0x00000000CFDD8C40 000860 (v01 GBT 00000000 00000000)
ACPI: MATS 0x00000000CFDD94A0 000034 (v01 GBT 00000000 00000000)
ACPI: TAMG 0x00000000CFDD9510 000182 (v01 GBT GBT B0 5455312E BG?? 53450101)
ACPI: APIC 0x00000000CFDD8A40 0000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: MATS 0x00000000CFDD96C0 0061FD (v01 MATS RCM 80000001 INTL 20061109)
ACPI: SSDT 0x00000000CFDDF930 000B9C (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000022effffff]
Initmem setup node 0 [mem 0x00000000-0x22effffff]
NODE_DATA [mem 0x22eff9000-0x22effdfff]
[ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880226600000-ffff88022d7fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x22effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0xcfd9ffff]
node 0: [mem 0x100000000-0x22effffff]
On node 0 totalpages: 2092350
DMA zone: 56 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 11584 pages used for memmap
DMA32 zone: 847264 pages, LIFO batch:31
Normal zone: 16968 pages used for memmap
Normal zone: 1241088 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xcfda0000-0xcfdd0fff]
PM: Registered nosave memory: [mem 0xcfdd1000-0xcfdfffff]
PM: Registered nosave memory: [mem 0xcfe00000-0xcfefffff]
PM: Registered nosave memory: [mem 0xcff00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
e820: [mem 0xcff00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88022ec00000 s85824 r8192 d20672 u262144
pcpu-alloc: s85824 r8192 d20672 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2063721
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
AGP: Checking aperture...
AGP: No AGP bridge found
AGP: Node 0: aperture [bus addr 0xe680000000-0xe681ffffff] (32MB)
Aperture beyond 4GB. Ignoring.
AGP: Your BIOS doesn't leave a aperture memory hole
AGP: Please enable the IOMMU option in the BIOS setup
AGP: This costs you 64MB of RAM
AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB)
PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
Memory: 8094436K/8369400K available (5191K kernel code, 942K rwdata, 1824K rodata, 1200K init, 840K bss, 274964K reserved)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:33024 nr_irqs:744 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2818.910 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5637.82 BogoMIPS (lpj=11275640)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Yama: disabled by default; enable with sysctl kernel.yama.*
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
tseg: 00cff00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 20K (ffffffff81a19000 - ffffffff81a1e000)
ftrace: allocating 21551 entries in 85 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Opteron(tm) Processor 3350 HE (fam: 15, model: 02, stepping: 00)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (22551.28 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xcfda0000-0xcfdd0fff] (200704 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff]
pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
pci 0000:00:00.0: reg 0x1c: [mem 0xe0000000-0xffffffff 64bit]
pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:07.0: [1002:5a1b] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: System wakeup disabled by ACPI
pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: System wakeup disabled by ACPI
pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
pci 0000:00:11.0: reg 0x10: [io 0xff00-0xff07]
pci 0000:00:11.0: reg 0x14: [io 0xfe00-0xfe03]
pci 0000:00:11.0: reg 0x18: [io 0xfd00-0xfd07]
pci 0000:00:11.0: reg 0x1c: [io 0xfc00-0xfc03]
pci 0000:00:11.0: reg 0x20: [io 0xfb00-0xfb0f]
pci 0000:00:11.0: reg 0x24: [mem 0xfdfff000-0xfdfff3ff]
pci 0000:00:11.0: set SATA to AHCI mode
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfdffe000-0xfdffefff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfdffd000-0xfdffd0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfdffc000-0xfdffcfff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfdffb000-0xfdffb0ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x20: [io 0xfa00-0xfa0f]
pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfdff4000-0xfdff7fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfdffa000-0xfdffafff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 0x10: [mem 0xfdff9000-0xfdff9fff]
pci 0000:00:16.0: System wakeup disabled by ACPI
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 0x10: [mem 0xfdff8000-0xfdff80ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
pci 0000:01:00.0: [10de:11c0] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xde000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xaf00-0xaf7f]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
pci 0000:01:00.1: [10de:0e0b] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfcffc000-0xfcffffff]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xa000-0xafff]
pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfcffffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [1b6f:7023] type 00 class 0x0c0330
pci 0000:02:00.0: reg 0x10: [mem 0xfd3f8000-0xfd3fffff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
pci 0000:00:04.0: bridge window [mem 0xfd300000-0xfd3fffff]
pci 0000:00:04.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
pci 0000:03:00.0: [168c:0030] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xfddc0000-0xfdddffff 64bit]
pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:03:00.0: supports D1
pci 0000:03:00.0: PME# supported from D0 D1 D3hot
pci 0000:00:07.0: PCI bridge to [bus 03]
pci 0000:00:07.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:07.0: bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:07.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [io 0xce00-0xceff]
pci 0000:04:00.0: reg 0x18: [mem 0xfdaff000-0xfdafffff 64bit pref]
pci 0000:04:00.0: reg 0x20: [mem 0xfdaf8000-0xfdafbfff 64bit pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PCI bridge to [bus 04]
pci 0000:00:09.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:09.0: bridge window [mem 0xfdb00000-0xfdbfffff]
pci 0000:00:09.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
pci 0000:05:00.0: [1b6f:7023] type 00 class 0x0c0330
pci 0000:05:00.0: reg 0x10: [mem 0xfd7f8000-0xfd7fffff 64bit]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: PCI bridge to [bus 05]
pci 0000:00:0a.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:0a.0: bridge window [mem 0xfd700000-0xfd7fffff]
pci 0000:00:0a.0: bridge window [mem 0xfd400000-0xfd4fffff 64bit pref]
pci 0000:06:0e.0: [1106:3044] type 00 class 0x0c0010
pci 0000:06:0e.0: reg 0x10: [mem 0xfd9ff000-0xfd9ff7ff]
pci 0000:06:0e.0: reg 0x14: [io 0x9f00-0x9f7f]
pci 0000:06:0e.0: supports D2
pci 0000:06:0e.0: PME# supported from D2 D3hot D3cold
pci 0000:00:14.4: PCI bridge to [bus 06] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x9000-0x9fff]
pci 0000:00:14.4: bridge window [mem 0xfd900000-0xfd9fffff]
pci 0000:00:14.4: bridge window [mem 0xfd800000-0xfd8fffff pref]
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
pci 0000:00:15.0: PCI bridge to [bus 07]
pci 0000:00:15.0: bridge window [io 0x8000-0x8fff]
pci 0000:00:15.0: bridge window [mem 0xfd600000-0xfd6fffff]
pci 0000:00:15.0: bridge window [mem 0xfd500000-0xfd5fffff 64bit pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:00.0: can't claim BAR 3 [mem 0xe0000000-0xffffffff 64bit]: no compatible bridge window
e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
e820: reserve RAM buffer [mem 0xcfda0000-0xcfffffff]
e820: reserve RAM buffer [mem 0x22f000000-0x22fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [io 0x04d0-0x04d1] has been reserved
system 00:00: [io 0x0220-0x0225] has been reserved
system 00:00: [io 0x0290-0x0294] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
system 00:01: [io 0x0900-0x091f] has been reserved
system 00:01: [io 0x0228-0x022f] has been reserved
system 00:01: [io 0x040b] has been reserved
system 00:01: [io 0x04d6] has been reserved
system 00:01: [io 0x0c00-0x0c01] has been reserved
system 00:01: [io 0x0c14] has been reserved
system 00:01: [io 0x0c50-0x0c52] has been reserved
system 00:01: [io 0x0c6c-0x0c6d] has been reserved
system 00:01: [io 0x0c6f] has been reserved
system 00:01: [io 0x0cd0-0x0cd1] has been reserved
system 00:01: [io 0x0cd2-0x0cd3] has been reserved
system 00:01: [io 0x0cd4-0x0cdf] has been reserved
system 00:01: [io 0x0800-0x08fe] could not be reserved
system 00:01: [io 0x0a10-0x0a17] has been reserved
system 00:01: [io 0x0b00-0x0b0f] has been reserved
system 00:01: [io 0x0b10-0x0b1f] has been reserved
system 00:01: [io 0x0b20-0x0b3f] has been reserved
system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: disabling [mem 0x000ce800-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:05: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:05: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:05: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:05: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
pnp 00:05: disabling [mem 0x00100000-0xcfd9ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
system 00:05: [mem 0xcfda0000-0xcfdfffff] could not be reserved
system 00:05: [mem 0xffff0000-0xffffffff] has been reserved
system 00:05: [mem 0xcfe00000-0xcfefffff] has been reserved
system 00:05: [mem 0xcff00000-0xcfffffff] could not be reserved
system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:05: [mem 0xfee00000-0xfee00fff] could not be reserved
system 00:05: [mem 0xfff80000-0xfffeffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 6 devices
ACPI: bus type PNP unregistered
pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc07ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xa000-0xafff]
pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfcffffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
pci 0000:00:04.0: bridge window [mem 0xfd300000-0xfd3fffff]
pci 0000:00:04.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd0ffff pref]
pci 0000:00:07.0: PCI bridge to [bus 03]
pci 0000:00:07.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:07.0: bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:07.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
pci 0000:00:09.0: PCI bridge to [bus 04]
pci 0000:00:09.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:09.0: bridge window [mem 0xfdb00000-0xfdbfffff]
pci 0000:00:09.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
pci 0000:00:0a.0: PCI bridge to [bus 05]
pci 0000:00:0a.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:0a.0: bridge window [mem 0xfd700000-0xfd7fffff]
pci 0000:00:0a.0: bridge window [mem 0xfd400000-0xfd4fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 06]
pci 0000:00:14.4: bridge window [io 0x9000-0x9fff]
pci 0000:00:14.4: bridge window [mem 0xfd900000-0xfd9fffff]
pci 0000:00:14.4: bridge window [mem 0xfd800000-0xfd8fffff pref]
pci 0000:00:15.0: PCI bridge to [bus 07]
pci 0000:00:15.0: bridge window [io 0x8000-0x8fff]
pci 0000:00:15.0: bridge window [mem 0xfd600000-0xfd6fffff]
pci 0000:00:15.0: bridge window [mem 0xfd500000-0xfd5fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: resource 9 [mem 0xd0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfcffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfd300000-0xfd3fffff]
pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff]
pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xfdb00000-0xfdbfffff]
pci_bus 0000:04: resource 2 [mem 0xfda00000-0xfdafffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:05: resource 1 [mem 0xfd700000-0xfd7fffff]
pci_bus 0000:05: resource 2 [mem 0xfd400000-0xfd4fffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:06: resource 1 [mem 0xfd900000-0xfd9fffff]
pci_bus 0000:06: resource 2 [mem 0xfd800000-0xfd8fffff pref]
pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:06: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:06: resource 9 [mem 0xd0000000-0xfebfffff]
pci_bus 0000:07: resource 0 [io 0x8000-0x8fff]
pci_bus 0000:07: resource 1 [mem 0xfd600000-0xfd6fffff]
pci_bus 0000:07: resource 2 [mem 0xfd500000-0xfd5fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 14152K (ffff88003644c000 - ffff88003721e000)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
perf: AMD NB counters detected
microcode: CPU0: patch_level=0x0600081c
microcode: CPU1: patch_level=0x0600081c
microcode: CPU2: patch_level=0x0600081c
microcode: CPU3: patch_level=0x0600081c
microcode: Microcode Update Driver: v2.00 , Peter Oruba
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1417263831.980:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15965
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
GHES: HEST is not enabled!
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
i8042: If AUX port is really absent please use the 'i8042.noaux' option
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
registered taskstats version 1
rtc_cmos 00:02: setting system clock to 2014-11-29 12:23:52 UTC (1417263832)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1200K (ffffffff818ed000 - ffffffff81a19000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 940K (ffff880001515000 - ffff880001600000)
Freeing unused kernel memory: 224K (ffff8800017c8000 - ffff880001800000)
systemd-udevd[69]: starting version 215
random: systemd-udevd urandom read with 2 bits of entropy available
Floppy drive(s): fd0 is unknown type 13 (usb?)
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:04:00.0: irq 40 for MSI/MSI-X
r8169 0000:04:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000c64000, 90:2b:34:a8:39:0e, XID 0c900800 IRQ 40
r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
SCSI subsystem initialized
usbcore: registered new device driver usb
QUIRK: Enable AMD PLL fix
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:02:00.0: irq 41 for MSI/MSI-X
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
usb usb1: SerialNumber: 0000:02:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
libata version 3.00 loaded.
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
usb usb2: SerialNumber: 0000:02:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:05:00.0: irq 42 for MSI/MSI-X
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
usb usb3: SerialNumber: 0000:05:00.0
ahci 0000:00:11.0: version 3.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
xhci_hcd 0000:05:00.0: xHCI Host Controller
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
usb usb4: SerialNumber: 0000:05:00.0
ehci-pci: EHCI PCI platform driver
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff180 irq 19
ata3: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff200 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff280 irq 19
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 5
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfdffd000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
usb usb5: SerialNumber: 0000:00:12.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 6
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfdffb000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: EHCI Host Controller
usb usb6: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
usb usb6: SerialNumber: 0000:00:13.2
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 7
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 17, io mem 0xfdff8000
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: EHCI Host Controller
usb usb7: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
usb usb7: SerialNumber: 0000:00:16.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
ohci-pci: OHCI PCI platform driver
scsi4 : pata_atiixp
scsi5 : pata_atiixp
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 8
ohci-pci 0000:00:12.0: irq 18, io mem 0xfdffe000
firewire_ohci 0000:06:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: OHCI PCI host controller
usb usb8: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
usb usb8: SerialNumber: 0000:00:12.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 9
ohci-pci 0000:00:13.0: irq 18, io mem 0xfdffc000
usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: OHCI PCI host controller
usb usb9: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
usb usb9: SerialNumber: 0000:00:13.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 10
ohci-pci 0000:00:14.5: irq 18, io mem 0xfdffa000
usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: OHCI PCI host controller
usb usb10: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
usb usb10: SerialNumber: 0000:00:14.5
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
ata5.00: ATA-7: SAMSUNG HD103UJ, 1AA01118, max UDMA7
ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata5.01: ATA-9: WDC WD30EFRX-68AX9N0, 80.00A80, max UDMA/133
ata5.01: 5860533168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata5.00: limited to UDMA/33 due to 40-wire cable
ata5.01: limited to UDMA/33 due to 40-wire cable
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 11
ohci-pci 0000:00:16.0: irq 18, io mem 0xfdff9000
ata5.00: configured for UDMA/33
ata5.01: configured for UDMA/33
usb usb11: New USB device found, idVendor=1d6b, idProduct=0001
usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb11: Product: OHCI PCI host controller
usb usb11: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
usb usb11: SerialNumber: 0000:00:16.0
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 4 ports detected
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: ST32000542AS, CC34, max UDMA/133
ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: ATA-9: INTEL SSDSC2CW120A3, 400i, max UDMA/133
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: ATA-7: SAMSUNG HD642JJ, 1AA01113, max UDMA7
ata3.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: configured for UDMA/133
ata4.00: ATA-7: SAMSUNG HD502IJ, 1AA01112, max UDMA7
ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2CW12 400i PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access ATA ST32000542AS CC34 PQ: 0 ANSI: 5
scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD642JJ 1113 PQ: 0 ANSI: 5
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1112 PQ: 0 ANSI: 5
scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1118 PQ: 0 ANSI: 5
scsi 4:0:1:0: Direct-Access ATA WDC WD30EFRX-68A 0A80 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 3:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:0:0: [sdc] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 4:0:1:0: [sdf] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
sd 4:0:1:0: [sdf] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 4:0:1:0: [sdf] Write Protect is off
sd 4:0:1:0: [sdf] Mode Sense: 00 3a 00 00
sd 4:0:1:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
sdc: sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
sde: sde1
sdb: unknown partition table
sd 1:0:0:0: [sdb] Attached SCSI disk
sdd: sdd1 sdd2 < sdd5 >
sd 3:0:0:0: [sdd] Attached SCSI disk
firewire_core 0000:06:0e.0: created device fw0: GUID 0049e550d3600a00, S400
sd 4:0:0:0: [sde] Attached SCSI disk
sdf: sdf1 sdf2
sd 4:0:1:0: [sdf] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 4:0:0:0: Attached scsi generic sg4 type 0
sd 4:0:1:0: Attached scsi generic sg5 type 0
tsc: Refined TSC clocksource calibration: 2818.898 MHz
random: nonblocking pool is initialized
usb 11-3: new low-speed USB device number 2 using ohci-pci
usb 11-3: New USB device found, idVendor=046a, idProduct=0023
usb 11-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: HID 046a:0023 as /devices/pci0000:00/0000:00:16.0/usb11/11-3/11-3:1.0/0003:046A:0023.0001/input/input1
cherry 0003:046A:0023.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:16.0-3/input0
input: HID 046a:0023 as /devices/pci0000:00/0000:00:16.0/usb11/11-3/11-3:1.1/0003:046A:0023.0002/input/input2
cherry 0003:046A:0023.0002: input,hidraw1: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:16.0-3/input1
Switched to clocksource tsc
usb 11-4: new full-speed USB device number 3 using ohci-pci
usb 11-4: New USB device found, idVendor=1532, idProduct=0101
usb 11-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 11-4: Product: Razer Copperhead Laser Mouse
usb 11-4: Manufacturer: Razer
input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:16.0/usb11/11-4/11-4:1.0/0003:1532:0101.0003/input/input3
hid-generic 0003:1532:0101.0003: input,hidraw2: USB HID v1.00 Mouse [Razer Razer Copperhead Laser Mouse] on usb-0000:00:16.0-4/input0
input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:16.0/usb11/11-4/11-4:1.1/0003:1532:0101.0004/input/input4
hid-generic 0003:1532:0101.0004: input,hidraw3: USB HID v0.01 Keyboard [Razer Razer Copperhead Laser Mouse] on usb-0000:00:16.0-4/input1
floppy0: no floppy controllers found
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
fuse init (API version 7.23)
loop: module loaded
Guest personality initialized and is inactive
VMCI host device registered (name=vmci, major=10, minor=59)
Initialized host personality
systemd-udevd[193]: starting version 215
ACPI: acpi_idle registered with cpuidle
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
acpi-cpufreq: overriding BIOS provided _PSD data
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
ACPI: Power Button [PWRF]
wmi: Mapper loaded
Floppy drive(s): fd0 is unknown type 13 (usb?)
[drm] Initialized drm 1.1.0 20060810
cfg80211: Calling CRDA to update world regulatory domain
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
ACPI Warning: SystemIO range 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion 0x0000000000000b00-0x0000000000000b0f (\SOR1) (20140424/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x42
sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
sp5100_tco: Last reboot was not triggered by watchdog.
sp5100_tco: initialized (0xffffc90000c7ab00). heartbeat=60 sec (nowayout=0)
sound hdaudioC0D0: autoconfig: line_outs=4 (0x24/0x25/0x26/0x27/0x0) type:line
sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0x28/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: dig-out=0x2d/0x2e
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Front Mic=0x29
sound hdaudioC0D0: Rear Mic=0x2b
sound hdaudioC0D0: Line=0x2a
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
EDAC MC: Ver: 3.0.0
MCE: In-kernel MCE decoding enabled.
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.46 Wed Sep 24 14:23:40 PDT 2014
input: PC Speaker as /devices/platform/pcspkr/input/input15
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
AVX version of gcm_enc/dec engaged.
ath: EEPROM regdomain: 0x21
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: AU
ath: Regpair used: 0x21
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffc90010f00000, irq=19
cfg80211: Calling CRDA to update world regulatory domain
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
alg: No test for crc32 (crc32-pclmul)
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
cfg80211: Calling CRDA for country: AU
cfg80211: Regulatory domain changed to country: AU
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2400 mBm), (0 s)
cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2400 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[173]: Received request to flush runtime journal from PID 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input18
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input19
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0x65c offMax=0x2626
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.18_Debian (interface 0x001a0008).
vboxpci: IOMMU not found (not registered)
r8169 0000:04:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-3.fw
r8169 0000:04:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
nvidia 0000:01:00.0: irq 43 for MSI/MSI-X
ip_tables: (C) 2000-2006 Netfilter Core Team
ip6_tables: (C) 2000-2006 Netfilter Core Team
floppy0: no floppy controllers found
wlan0: authenticate with 00:27:0d:5e:a1:00
wlan0: send auth to 00:27:0d:5e:a1:00 (try 1/3)
wlan0: authenticated
wlan0: associate with 00:27:0d:5e:a1:00 (try 1/3)
wlan0: RX AssocResp from 00:27:0d:5e:a1:00 (capab=0x411 status=0 aid=169)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: DE
cfg80211: Regulatory domain changed to country: DE
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5470000 KHz - 5725000 KHz @ 80000 KHz), (N/A, 2698 mBm), (0 s)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
wlan0: deauthenticated from 00:27:0d:5e:a1:00 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlan0: authenticate with 00:27:0d:5e:a1:00
wlan0: send auth to 00:27:0d:5e:a1:00 (try 1/3)
wlan0: authenticated
wlan0: associate with 00:27:0d:5e:a1:00 (try 1/3)
wlan0: RX AssocResp from 00:27:0d:5e:a1:00 (capab=0x411 status=0 aid=169)
wlan0: associated
cfg80211: Calling CRDA for country: DE
cfg80211: Regulatory domain changed to country: DE
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5470000 KHz - 5725000 KHz @ 80000 KHz), (N/A, 2698 mBm), (0 s)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
wlan0: deauthenticating from 00:27:0d:5e:a1:00 by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: Calling CRDA to update world regulatory domain
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlan0: authenticate with 00:27:0d:5e:a1:00
wlan0: send auth to 00:27:0d:5e:a1:00 (try 1/3)
wlan0: authenticated
wlan0: associate with 00:27:0d:5e:a1:00 (try 1/3)
wlan0: RX AssocResp from 00:27:0d:5e:a1:00 (capab=0x411 status=0 aid=169)
wlan0: associated
cfg80211: Calling CRDA for country: DE
cfg80211: Regulatory domain changed to country: DE
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5470000 KHz - 5725000 KHz @ 80000 KHz), (N/A, 2698 mBm), (0 s)
cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)